Biobase BBS-DDC - Installation Conditions and Operating Environment

8
Hexagon socket head cap screws
M10×55
Paper package(behind the cabinet)
5sets
flat washer 10 + spring washer 10
Paper package(behind the cabinet)
5sets
Hexagon wrench
Paper package(behind the cabinet
1 set
BBS-SSC Packing list
Items
Position
Quantity
Main body
Inside the packing box
1 unit
Base stand
Paper package(behind the cabinet)
1 pc
Power cord
Packing bag(behind the cabinet)
1 pc
Fuse protector（10A）
Packing bag(behind the cabinet)
1 pc
UV Lamp
（
T6 30W
）
Paper package(behind the cabinet)
1 pc
User Manual
Paper package(behind the cabinet)
1set
Inspection report
Paper package(behind the cabinet)
1 pc
Certificate of quality
Paper package(behind the cabinet)
1 pc
Warranty card
Paper package(behind the cabinet)
1 pc
Hexagon socket head cap screws
M10×55
Paper package(behind the cabinet)
5 sets
flat washer 10 + spring washer 10
Paper package(behind the cabinet)
5 sets
Hexagon wrench
Paper package(behind the cabinet
1 set
1.3 Installation Conditions and Operating Environment
Laminar flow cabinet should be placed in a position where the airflow can be protected.
Laminar flow cabinet should not be installed opposite to door or window and far away from the air
outlet of air conditioner. It should avoid airflow influence from ventilating system, air conditioner,
door, window and movement of people.
At least 300mm gap must be kept in the side and back side of the Laminar Air Flow for clean
operating and for inspection.
Working environment:
(1) Only applicable to indoor operation;
(2) Ambient temperature: 15℃
～
35℃;
(3) Relative Humidity: ≤75%;
(4) Atmospheric pressure range: 70 kPa
～
106 kPa;
(5) Electrical parameters: Adequate power supply to the Laminar flow cabinet (See 2.1.4 Technical