R
eference: McIlroy WE, Maki BE. Preferred placement of feet during quiet stance:
development of a standardized foot placement for balance testing. Clinical Biomechanics Vol 17,
No. 1 66-70 1997
3. If you do not want to follow the default test conditions, Select More Options. Here you can set
the Test Trial Time, enter the number of trials, adjust the Rest Countdown, and change which
conditions you want to test by simply touching to highlight the conditions you want to do.
You can also toggle the cursor ON/OFF. The cursor should be OFF during the actual test.
Touch <OK> to confirm your selections and return to the Testing screen.
• Use the <▲> or <▼> keys to set the Test Trial time in five-second increments
(during the routine the system will count down from the time setting selected).
• To set the number of trials or rest countdown, touch the appropriate key and then enter the
setting from the keypad displayed.
CONTENTS
TESTING — 8-20 —
To Next Page
Loading...
