Bioquell ProteQ - Page 21

BIOQUELL PROTEQ USER MANUAL -EN
TD092-O&M-001
REVISION 5 DRAFT
Page 21 of 58
If the system is installed in an enclosure or chamber which is used to
decontaminate items using a validated cycle, ensure the load or equipment are
arranged and placed within the area in accordance with the validation.
If using a Multi Generator controller refer to its user manual
Note: Full screen navigation is given in Section 20.
Start decontamination page:
Cycle name Quantity of peroxide
required
If Flexi Adapter fitted:
Refer to section 9 to change the cycle.
Expiry date of hydrogen peroxide
Volume of hydrogen peroxide in the bottle
Hydrogen peroxide lot number
Name of person logged on
To open decontamination cycle page
Parameter display
Administration menu
Cycle name
Quantity of peroxide required
Hydrogen peroxide lot number (User input –
touch this area of the screen and enter the lot
number, this will then appear on the printed
record)