Project Type
Instructions
Date: February 12 2021
Customer: Thermor Ltd
Job Number: TH6151
Item Number: BD353
Designer: Alex Vranjesevic
Revision: C
Artwork is not to be amended or scaled. If any changes
are required please send through Thermor oce with
instructions, and we will amend here and resend artwork
through. PLEASE RETURN WITH SIGNATURE
Contact: Graphic’s Department
graphics@thermor-ins.com
Colour Breakdown
Reason For Project:
New Item:
New Branding:
Design Update:
N/A: X
UPC (For Reference Only)
AM
PM
RESULTS
Take: 2 measurements, 1 minute apart
• Empty bladder (If necessary)
• In the morning before breakfast, before taking medication
• Sit with back supported and measurement arm resting on a
table. Sit with feet flat on the floor.
Take: 2 measurements, 1 minute apart
• Empty bladder (If necessary)
• 2 hours after dinner, before taking medication
• Sit with back supported and measurement arm resting on a
table. Sit with feet flat on the floor.
• Avoid coffee and smoking within the hour, and no exercise 30
minutes before measuring.
Discard Day 1 measurements.
Average your day 2-7 measurements
= Average
< 135 / 85 mmHg = NO
> 135 / 85 mmHg = YES
No Hypertension Yes Hypertension
*Note: If the result is “borderline” repeat the series for confirmation. This data
can be used by a medical professional to make a diagnosis of hypertension.
To start your measurement, see section 3.6 Measuring Your Blood Pressure. Once the Protocol
is complete, after the 7 days, you can view your average. See section 3.9B Recalling Memory
in 7D Mode.
IMPORTANT:
It is critical that users follow the measurement protocol carefully to ensure reliable
data for diagnosis.
To Next Page
Loading...
