G41D3C BIOS Manual
14
AMI OEMB table
Set this value to allow the ACPI BIOS to add a pointer to an OEMB table in the Root
System Description Table (RSDT) table.
Options: Enabled (Default) / Disabled
Headless mode
This is a server-specific feature. A headless server is one that operates without a
keyboard, monitor or mouse. To run in headless mode, both BIOS and operating
system (e.g. Windows Server 2003) must support headless operation.
Options: Dis abled (Default) / Enabled
Energy Lake Feature
This item allows you control the energy lake feature.
Options: Dis abled (Default) / Enabled
APIC ACPI SCI IRQ
Options: Dis abled (Default) / Enabled
High Per for mance Eve nt Timer
This item allows you to enable or disabled the HPET.
Options: Dis abled (Default) / Enabled
HPET Memory Address
This item allows you to set the memory address of HPET.
Options: FED00000h (Default) / FED01000h / FED02000h / FED03000h
Resume On PME#
When you select Enabled, a PME signal from PCI card returns the system to Full ON
state.
For this function to work, you may need a LAN add-on card which supports the
Wake on LAN function. Set the Wake on LAN (WOL) jumper on motherboard to
enable if applicable.
Options: Dis abled (Default) / Enabled
To Next Page
Loading...
