G41D3C BIOS Manual
27
6 Performance Menu
This sub menu allows you to change voltage and c lock of various devices.
(However, we suggest you to use the default setting. Changing the voltage and clock
improperly may damage the device.)
Notice
z Beware of that setting inappropriate values in items of this menu may cause
system to malfunction.
BIOS SETUP UTILITY
Main Advanced
PCIPnP Boot
Chipset Performance
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit
Enter
F1
F10
ESC
Advance Performance Settings
WARNING: Please Clear CMOS if system no display
after overclocking.
CPU Frequency Setting
PCIE Clock By [Auto]
DRAM Frequency [Auto]
Configure DRAM Timing by SPD [Enabled]
[266]
Intel(R) SpeedStep(tm) tech [Enabled]
Ratio CMOS Setting [ x11.5]
PCIE Frequency Setting [100]
Exit
Disabled: Disable GV3
Enabled: Enable GV3
Intel(R) SpeedStep(tm) Tech
This item allows you to enable SpeedStep technology for better power saving.
SpeedStep is a technology built into some Intel processors that allows the c lock
speed of the processor to be dynamically changed by software.
Options: Enabled (Default) / Disabled
Ratio CMOS Setting
This item allows you to set the CPU ratio frequency.
Options: x11.5 / x6.0 ~ x11.0 (Differed by CPU)
CPU Frequency Setting
This item allows you to select the CPU Frequency.
Options: 266 (Default) / Min= 100MHz; Max= 600MHz
To Next Page
Loading...
Need help?
General
