25 PGH Programming Head
Conductor to ICS: PGH with straight cable
The ICS 3000 is operated with the PGH programming
head, which may have a spiral cable or a straight cable
as a conductor.
If the Operation Module is used in portable fashion,
there is a danger of tripping if there is a straight cable
hanging down loose.
• When transporting the unit, wind a straight PGH cable
around the mount on the back of the
operation module as shown below.
Note: If you wish to fold down the Operation Module
completely onto the Docking Station, please make
sure that the cable does not get pinched.
To Next Page
Loading...
