9. Cautions
1. To prevent scalds, please don’t touch the nozzle or the heated bed
when the printer is printing.
2. Please don’t touch the magnet bed immediately after a print is done,
wait for the hot plate to cool down before taking the print out.
3. Place the printer on top of a rigid body, otherwise, print quality might
be affected.
4. Don’t place your hand inside the printer, avoid getting slam or pinch
by the printer.
5. Don’t use the printer over 100 hours continuously, otherwise, the
machine might overheat and cause damage.
6. For safety, people under 18 must be supervised by adult when using
the printer.
7. Don’t place the printer near flammable substance. Place your printer
at a ventilated, clean and cool environment.
8. Follow the user manual carefully. Disassemble or modify your printer
without permission might cause damage to your printer, and the user will
be responsible for all the causes.
To Next Page
Loading...
