Need help?Do you have a question about the BIQU B1 and is the answer not in the manual?
General| Build Volume | 235 x 235 x 270 mm |
|---|---|
| Layer Resolution | 0.05 - 0.3 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Bed Leveling | Manual |
| Bed Temperature | Up to 100°C |
| Display | 3.5-inch color touchscreen |
| Printing Technology | FDM (Fused Deposition Modeling) |
| Power Output | 24V DC |
| Print Speed | 60 - 100 mm/s |
| Connectivity | USB, SD Card |
| Supported Filaments | PLA, ABS, TPU, PETG |
| Extruder Type | Bowden Extruder |
| Power Input | 50/60Hz |
Connects the terminal wire to the hot bed socket.
Attaches M5 screws into the aluminum profile for assembly.
Connects coupling device, mounts isolation column and motor.
Installs the main 4-in-1 terminal wire harness.
Adjusts eccentric nut for optimal printer stability and smooth movement.
Installs X-axis slider sheet and belt onto the frame.
Installs the filament feed tube and quick connectors.
Fixes the Z-axis limit module onto the printer frame.
Guides users through the manual platform calibration process.
Adjusts nozzle height using hand-screw nuts for precise leveling.
Guides on inserting filament into the extruder.
Explains offline and online printing modes for the BIQU-B1.
Instructions for installing necessary printer drivers on a PC.
Step-by-step guide to install the Ultimaker Cura slicing software.
Initial setup and configuration of Ultimaker Cura for the printer.
Guide on using Ultimaker Cura to slice 3D models for printing.
Instructions for printing models using an SD card.
Guide for printing models directly from a PC via USB.
Step-by-step guide for manually leveling the printer's build platform.
Instructions for setting up and using the optional auto-leveling feature.
Guide for installing and configuring the optional filament sensor module.
How to enable and use the model preview feature in Cura for easier file selection.
Switching to and operating the retro-style Marlin firmware interface.
Solutions for layer shifting issues and speed recommendations.
Troubleshooting advice for filament leakage from the nozzle.
Steps to resolve issues with filament installation and jams.
Methods to prevent and fix print edge warping.
Addressing bobbling, cracks, and gaps in 3D prints.
Diagnosing and fixing abnormal extruder sounds.
Troubleshooting inconsistent extrusion and reducing stringing.
To Next Page
