4. Platform Calibration
4-1 Platform Calibration
After the installation of BIQU B1, users need to perform a platform
calibration on BIQU B1. The steps are as follows:
Step 1
1. Power switch
2. Power cord socket
Awareness: Before turning on, please check whether the
voltage mode matches your household power supply. If not, you
can select the mode by using screwdriver.
Confirming that the wiring is steady and correct. Inserting one
end of the power cord into the power cord socket and the other
end into the household power supply, and then turn on the power
switch of the machine.
Awareness: do not unplug the Type-C data cable when the
machine is on.
To Next Page
Loading...
