BIQU Hurakan - Specifications

WWW.BIQU3D.COM
4 / 63
2. Specifications
Specifications
3D Printer Name
BIQU-Hurakan
Build Volume
220 x 220 x 270 mm
Printhead
1pc
Layer Thickness
0.1 - 0.3 mm
Nozzle Diameter
Standard 0.4 mm
Printing Accuracy
±0.05 mm
Filament
PLA/ABS/PETG...(Any material with print
temp lower than 260℃, including flexible
filament with 95A stiffness.)
File Format
G-code
Firmware
Klipper
Printing Method
USB Drive / LAN Controlled
Slicing Software Supported
Cura / Repetier-Host / Simplify 3D...
Rated Voltage
100 - 120V / 200 - 240V 50 / 60 HZ
Output Voltage
24V
Rated Power
280W
Heated Bed Power
100W/240W
Maximum Temperature of
Heated Bed
100℃
Maximum Temperature of
Nozzle
260℃
Default Speed Limit
(Firmware)
180 mm/s
Suggested Printing Speed
120 mm/s
Filament Runout Detection
Standard Feature