To Next PageTo Next Page
Need help?Do you have a question about the Biral ModulA RED Series and is the answer not in the manual?
General| Brand | Biral |
|---|---|
| Model | ModulA RED Series |
| Category | Water Pump |
| Language | English |
General information about the installation and operating instructions, emphasizing their importance.
Guidance on recognizing and obeying information signs on the plant.
Specifies necessary qualifications and responsibilities for personnel involved in operation.
Details the dangers and consequences of ignoring safety instructions.
Stresses the need to follow all safety regulations and instructions meticulously.
Outlines safety precautions specifically for operators and personnel during use.
Provides safety guidelines for installation, maintenance, and inspection tasks.
Prohibits unauthorized modifications and the use of non-genuine spare parts.
Highlights the risks associated with incorrect operational procedures.
Defines the intended applications and systems for ModulA pumps.
Specifies acceptable liquids and requirements for delivery media.
Details permissible medium temperatures, pressures, and ambient temperatures.
Explains pump adjustment when a non-return valve is installed.
Advises on measures to prevent frost damage during inactivity.
Information on reducing heat loss via insulation.
Indicates how to identify the pump's flow direction.
Important general guidelines and precautions before installation.
Specifies correct orientation and mounting positions for the pump.
Procedure for repositioning the frequency converter unit.
Step-by-step instructions for rotating the pump head.
Detailed steps for physically installing the pump into the piping system.
Specifies required supply voltage, frequency, and tolerances.
Guidelines for safely connecting the pump to mains power.
Illustrative diagrams showing terminal connections for power and signals.
Explains configuring pump functions using onboard switches.
Details setting a limit on the pump's maximum flow rate.
Pre-operational checks, filling, and ventilation of pump and system.
Describes expected pump behavior and status indicators upon power-up.
Overview of the control panel, keys, LEDs, and functions.
Explains different control modes: proportional pressure, constant pressure, constant speed.
Instructions on adjusting target delivery height using pump keys.
How to interpret LED indicators showing current delivery height.
Table providing maximum performance data for pump models.
Method to lock or unlock control panel keys.
Procedure for changing pump state between start and stop.
How to understand pump status via Biral impeller light and color.
Manual adjustments and settings made directly on the pump.
Description of Biral Remote adapter and its functionality.
Details on BIM A2 module for signal output and dual pump configurations.
Information on BIM B2 module for external speed control and dual pump functions.
Information on a kit for installing electronics in a recessed manner.
Details specific to the cold water pump variant.
