For pumps of a smaller design (P1 small 750 W)
it is not necessary to take out the frequency converter,
the pump head can be turned fully.
The sensor cable must also be separated in advance
from the frequency converter!
Turning the pump head
without taking out the frequency
converter:
ModulA type:
40-10 220, 40-12 250, 40-18 250
50-6 240, 50-12 270, 50-18 270
65-8 270, 65-12 340, 80-8 360
Turning the pump head with
removal of the frequency
converter:
ModulA type:
65-15 340
80-12 360
100-12 450
Warning
Do not drop the disassembled pump parts!
Warning
Risk of injury from escaping steam!
4.4 Install the pump in the unit
➀ Close the shut-off valves and ensure that the system
is without pressure when fitting the pump.
➁ Install the pump in the pipe with seals.
To Next Page
Loading...
Need help?
General
