To Next PageTo Next Page
Need help?Do you have a question about the Birch CD-108E and is the answer not in the manual?
General| Brand | Birch |
|---|---|
| Model | CD-108E |
| Category | Barcode Reader |
| Language | English |
Lists all barcode symbologies that the reader can decode, including common and specialized types.
Step-by-step instructions for connecting the barcode reader using a keyboard wedge interface.
Step-by-step instructions for connecting the barcode reader using an RS232 serial interface.
Details the pin configurations for DIN and MiniDIN keyboard wedge connectors.
Details the pin assignments for DB9 connectors used in RS232 and WAND emulation modes.
Explains the general process and flow for configuring reader parameters using barcodes.
Covers resetting parameters to factory defaults and transferring configuration data.
Provides barcodes for essential setup commands like Save, Recall, Start, End, and Abort Configuration.
Options to set the reader's interface mode: Keyboard/USB, RS232, WAND Emulation, or OCIA.
Settings to control reading modes such as Trigger, Continuous, Flash, and Good Read feedback.
Configuration for RS-232 serial communication parameters: speed, data bits, and stop bits.
Settings for RS-232 parity checking and handshake protocols (RTS/CTS, XON/XOFF).
Options to match the reader's output to specific computer terminal types like IBM PC/AT.
Settings for upper/lower case conversion, ALT method character sending, and numerical pad usage.
Configures the terminator characters appended to scanned data and time-out between characters.
Settings for TTL level representation, scan speed, and output format in Wand Emulation mode.
Configuration settings specific to the OCIA (Optical Character Interface Adapter) mode.
Enabling or disabling various barcode symbologies like UPC-A, EAN, Code 39, Code 128, etc.
Specific settings for UPC/EAN/JAN, including reading types, supplements, and check digits.
Configuration for Code 39: type, check digit transmission, start/stop characters, and code length.
Configuration for Code 128: check digit, FNC2 append, and code length settings.
Configuration for Interleave 25: check digit, character count, and code length settings.
Configuration for Industrial 25: check digit transmission and code length settings.
Configuration for Matrix 25: check digit transmission and code length settings.
Configuration for Codabar/NW7: start/stop characters and code length settings.
Configuration for Code 93: check digit transmission and code length settings.
Configuration for Code 11: check digit transmission and code length settings.
Configuration for MSI/PLESSEY: check digit transmission and code length settings.
Configuration for BC 412: check digit transmission and code length settings.
Configuration for China Postage: check digit transmission and code length settings.
Allows selection of the user interface language from a list of supported languages.
Sets a leading character to identify scanned barcode types and allows user-defined IDs.
Configuration for reading level, accuracy, sensitivity, buzzer tone, PnP, and reverse output.
Steps to define which characters to delete, their position, and the number of characters.
Selects specific barcode symbologies for which character deletion rules will be applied.
Specifies the exact character position and the quantity of characters to be deleted from scanned data.
Steps to define where to insert characters, which characters to insert, and for which symbology.
Selects specific barcode symbologies for which character insertion rules will be applied.
Specifies the exact character position and the ASCII characters to be inserted into scanned data.
A reference chart mapping decimal values to their corresponding configuration barcodes.
Reference table for ASCII control characters and their corresponding barcode representations.
Reference table for ASCII symbols and numerical digits and their barcode representations.
Reference table for ASCII letters (upper/lower case) and special characters and their barcode representations.
Reference table for ASCII lowercase letters and extended characters, including DEL.
Reference table for function keys (F1-F12, Navigation, etc.) and their corresponding barcode representations.
