2
ROTATING DRUM AND PADDLE
TO AVOID SERIOUS PERSONAL INJURY
SAFETY TIPS
NEVER Touch This Machine Without Training and Authorization By Your Supervisor.
ALWAYS Read Operation and Parts Manual BEFORE Operating, Cleaning or Servicing.
ONLY Use a Qualied Electrician to Install According to Local Building Codes: Machine
MUST Be Properly Grounded.
ONLY Install on Level, Non-Skid Surface in a Clean, Well-Lighted Area Away From Children
and Visitors.
DO NOT Attempt to Operate This Machine Until it has Been Inspected and Demonstrated by
the Seller - Recognized BIRO Representative.
DO NOT Alter or Modify This Machine in any Way From its Original Form.
NEVER Attempt to Open Hopper Cover While Former is Running.
ALWAYS Keep Hands Clear of the Rotating Drum and Other Moving Parts.
ALWAYS Clean and Inspect Machine Daily
ALWAYS Turn O, Unplug From Power Source and Perform Lockout/Tagout Procedure to
This Machine BEFORE Cleaning, Servicing or Any Other Reason.
NEVER Leave Machine Unattended While the Former is Running.
PROMPTLY REPLACE Any Worn or Illegible Warning Labels.
USE ONLY BIRO Parts and Accessories Properly Installed.
NEVER Attempt to Open Drum Cover While Former is Running.
To Next Page
Loading...
