Bissell CROSSWAVE 1785 SERIES User Manual

Bissell CROSSWAVE 1785 SERIES

6 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Skip to content
Manuals+
User Manuals Simplified.
Bissell Crosswave Vacuum User Manual
Home » Bissell » Bissell Crosswave Vacuum User Manual  
QUICKSTART GUIDE
1785 SERIES
Contents  [ hide
1  Quick Start Usage Instructions
2  Getting the Best Clean from Your
CrossWave™
3  Tips & Tricks
4  File Downloads
5  References
6  Related Manuals
Quick Start Usage Instructions
WARNING
Refer to the enclosed user guide for complete instructions and important safety notices.
1.   First, insert the handle at the top of the body of the machine until you hear a click.

Table of Contents

Bissell Crosswave Vacuum User Manual1

Other manuals for Bissell CROSSWAVE 1785 SERIES

User Guide17 pages

Quick Start Guide2 pages

Questions and Answers:

N
npettyAug 21, 2025
Why does my Bissell CROSSWAVE 1785 have no suction?
- C
  Christina QuinnAug 21, 2025
  If your Bissell Vacuum Cleaner loses suction power, several factors could be the cause. First, ensure that both the clean and dirty water tanks are correctly seated. Remove and reseat them properly on the machine. Also, the dirty tank might be full; empty it if it has reached the full line. Other potential issues include a brush window that isn't latched, a debris channel clogged, or a filter clogged by debris. Turn the power off and unplug the machine before re-installing the brush window or cleaning the debris channel with a paper towel. Also, clean or remove any debris clogging the filter screen.
S
Shawn MeyerAug 23, 2025
What to do if my Bissell CROSSWAVE 1785 Vacuum Cleaner is leaking?
- C
  Catherine HarrisonAug 23, 2025
  If your Bissell Vacuum Cleaner is leaking, it could be that the cap of the clean water tank is not closed properly. Remove the clean water tank and re-apply the cap to ensure it's sealed.
C
Christopher MendozaAug 26, 2025
How to fix a Bissell Vacuum Cleaner brush roll that won't turn?
- N
  Nancy PerezAug 26, 2025
  If the brush roll on your Bissell Vacuum Cleaner isn't turning, it's likely due to an obstruction. Turn the appliance OFF, unplug it, and remove the brush window and brush roll to clear the obstruction.
F
farleyjulieAug 28, 2025
How to fix weak or no spray in Bissell Vacuum Cleaner?
- C
  chapmanjeanetteAug 28, 2025
  If your Bissell Vacuum Cleaner has weak or no spray, the spray tips in the foot may be blocked. Use a needle to clean the spray tips located under the brush roll window.
J
Joshua PhillipsAug 30, 2025
How to fix reduced spray on Bissell CROSSWAVE 1785 Vacuum Cleaner?
- L
  Laura CoxAug 30, 2025
  If your Bissell Vacuum Cleaner has reduced or no spray, there are several possible reasons. The clean water tank might be empty, so refill it. It may also not be seated completely; turn the power off, remove, and reseat the tank. The system might not be fully primed, so hold the trigger for 10 to 15 seconds to ensure the solution flows to the spray tips. Check that the brush window is latched in place; if not, turn the power off, unplug the machine, and reinstall the brush window. Ensure you are holding the trigger continuously while using the machine. Finally, the spray tips on the foot could be clogged; use a pin to clean them.
D
David BoyleSep 1, 2025
What to do if Bissell Vacuum Cleaner brush isn't turning?
- L
  Lisa MillerSep 1, 2025
  If the brush roll on your Bissell Vacuum Cleaner isn't turning, several things could be happening. First, ensure the machine is reclined, as the brush roll is designed to turn on when not upright. Another possibility is that the brush roll isn't installed correctly. Turn the power off, unplug the machine, and follow the instructions to replace the brush roll. Finally, an obstruction may be stopping the brush roll. Turn the power off, unplug the machine, remove the brush window and brush roll, and clear any obstructions.
A
Ashley AverySep 3, 2025
How to fix reduced spray or no spray in Bissell CROSSWAVE 1785?
- D
  Dakota BrownSep 3, 2025
  If your Bissell Vacuum Cleaner has reduced or no spray, it could be due to several reasons. First, check if the clean water tank is empty and refill it if needed. Ensure the tank is completely seated. Prime the system by holding the trigger for 10 to 15 seconds. Make sure the brush window is latched in place. Hold the trigger continuously while using the machine. Finally, the spray tips on the foot might be clogged; clean them with a pin.
C
Catherine BuckSep 5, 2025
What to do if my Bissell CROSSWAVE 1785 Vacuum Cleaner brush roll is not turning?
- J
  Jesse Martinez Jr.Sep 5, 2025
  If the brush roll on your Bissell Vacuum Cleaner isn't turning, first ensure the machine is reclined, as the brush roll is designed to operate when not upright. Also, turn the power OFF, unplug the machine, and check if the brush roll is installed properly, following the instructions on page 11 for replacing it. An obstruction may also be the cause; in that case, turn the power OFF, unplug the machine, remove the brush window and brush roll to clear any obstructions.
E
Elizabeth WilsonSep 7, 2025
Why is my Bissell Vacuum Cleaner losing suction or streaking?
- J
  Joseph MillerSep 7, 2025
  If your Bissell Vacuum Cleaner loses suction or leaves streaks, several factors could be at play. First, ensure both the clean and dirty water tanks are correctly seated. An improperly seated tank can cause suction problems. If the dirty water tank is full, empty it. Also, check if the brush window is securely latched; if not, unplug the machine and reinstall the window. Debris in the foot channel can also cause issues; clean it with a paper towel. Check the filter for clogs and clean it if necessary. Finally, if you've applied too much water, go over the area again without spraying.
I
iwadeSep 9, 2025
How to fix reduced or no spray on a Bissell Vacuum Cleaner?
- S
  saragainesSep 9, 2025
  If your Bissell Vacuum Cleaner isn't spraying, several things could be happening. First, check the clean water tank to ensure it's full and correctly installed; refill and reinstall if needed. The system might not be fully primed, so hold the trigger for 10 to 15 seconds to allow the solution to reach the spray tips. Also, make sure the brush window is latched in place by unplugging the machine and reinstalling it. Finally, ensure you're continuously holding the trigger while using the machine to spray the solution.

Bissell CROSSWAVE 1785 SERIES Specifications

General

Cleaning Path Width	10.5 inches
Tank Capacity (Clean)	28 oz
Cord Length	25 feet
Corded/Cordless	Corded
Brush Type	Multi-Surface Brush Roll
Tank Capacity (Dirty)	14.5 oz
Power Source	Electric
Voltage	120V
Surface Type	Area Rugs
Amps	4.4 Amps
Special Features	SmartClean Fingertip Controls
Type	Wet/Dry Vacuum Cleaner

Related product manuals

Preview: Bissell CROSSWAVE 17132

Bissell CROSSWAVE 17132

Preview: Bissell CrossWave 1713 SERIES

Bissell CrossWave 1713 SERIES

Preview: Bissell CROSSWAVE

Bissell CROSSWAVE

Preview: Bissell CROSSWAVE PET

Bissell CROSSWAVE PET

Preview: Bissell CROSSWAVE PET PRO

Bissell CROSSWAVE PET PRO

Preview: Bissell CROSSWAVE HYDROSTEAM

Bissell CROSSWAVE HYDROSTEAM

Bissell Crosswave 2211 Series

Preview: Bissell CROSSWAVE CORDLESS MAX

Bissell CROSSWAVE CORDLESS MAX

CROSSWAVE PET 2306 Series

Preview: CROSSWAVE PET 2328 Series

CROSSWAVE PET 2328 Series

Preview: CROSSWAVE CORDLESS MAX DELUXE

CROSSWAVE CORDLESS MAX DELUXE

Preview: CROSSWAVE Premier 2304 Series

CROSSWAVE Premier 2304 Series