SRP-S300
Ver. 2.00
Printer Introduction
Providing environmentally friendly printing, the SRP-S300 Series high performance, 3-
inch thermal linerless printer provides excellent printing quality of up to 203 dpi. The
printing solution supports various widths of media, roll diameter of up to 120 mm and a
number of economic features including back-feed function.
Supporting an ergonomic design and built-in power supply to save on counter space
and protect against water damage. The Linerless printer is bundled with B-Melodist an
audio and visual indicator. Supplied with optional I/F card, a wide range of connectivity
choices are provided including USB 2.0, Serial, Ethernet, Parallel, WLAN and Bluetooth.
The SRP-S300 Series is compatible with market-leading programming languages.
The main features of the printer are as follows
1. Print at a max. speed of 170mm/s (Sticky, Re-stick, Linerless Extreme),
300mm/s(Receipt).
2. Low noise thermal printing.
3. Support of USB (built-in type), Ethernet, Serial, Parallel, Powered USB, Wireless LAN,
and Bluetooth interfaces.
4. Internal data buffer (data can be received and buffered while printing).
5. Control of external devices like cash registers through peripheral device drive
circuit.
6. Barcode Printing.
7. Support of various print density settings (by changing memory switch settings).
To Next Page
Loading...
Need help?
General
