BK Precision 1785B - Menu Description; Display Annunciators

6
Menu description
>MAX VOLT
Set the maximum output voltage value
>INIT OUT
Initiate the output state to ON or not
>INIT VOL
Initiate the output voltage to 0 volt or not
>KEY SOUN
Switch On/Off the buzzer sound when you press
any key
>BAUD
RATE
Set the communication baud rate
>ADDR
Set the communication address
>KEY LOCK
Set the password for function keys
>EXIT
Exit
Display annunciators
OFF
The power supply’s
output is off
Timer
Not used
CV
Constant voltage
mode
Sense
Not used
CC
Constant current
mode
Ext
Not used
*
Not used
Adrs
The instrument is
communicating with an
IT-E131/IT-E132/IT-E133
Meter
Meter mode
Rmt
The instrument is in remote
state. The only active key is
the Local KEY.
Shift
Not used
Error
The instrument has error
OVP
Over voltage protect
state
Prot
Not used
OCP
Over current protect
state
Lock
The keyboard is locked by a
password
Menu