Check the sweep time.
SWEep:SOURce {INTernal|EXTernal}
Set trigger source of sweep as internal (INTernal) or external (EXTernal).
SWEep:SOURce?
Check current trigger source.
SWEep:STATe {ON|OFF}
Turn on sweep mode (ON) or turn off sweep mode (OFF).
SWEep:STATe?
Check the “on/off” state of sweep mode. The returned data are “0” (OFF) or “1” (ON). It returns to
fixed frequency mode in “off” state.
Counting instructions
FUNCtion:TOTal INITial
Initialize the counter.
FUNCtion:TOTal STARt
Set the counter to start counting.
FUNCtion:TOTal STOP
Set the counter to stop counting.
FUNCtion:TOTal CLEAr
Clear the counted value of the counter.
FUNCtion:TOTal?
Record the current value of the counter.
Frequency Measurement instructions
FUNCtion:FREQuency MEASure
Enable frequency measurement function for the instrument to start a new frequency measurement.
FUNCtion:FREQuency?
Record last frequency value after frequency measurement is finished.
FUNCtion:FREQuency GATE <time>
Set gate time in the range of 10ms to 10s for frequency measurement.
FUNCtion:FREQuency GATE?
Check current gate time for frequency meadurement.
Trigger instructions
TRIGger:SOURce {IMMediate|EXTernal|BUS}
Set trigger source or modulating source for available functions as internal (IMMediate), external
(EXTernal) or single (BUS).
TRIGger:SOURce?
Check trigger source or modulating source of current function as internal (IMM), external, (EXT)
or single (BUS).
System related instructions:
*IDN？
This query will return the instrument’s manufacturer, model number and firmware version.
Example: B+K Precision 4084AWG V1.00
To Next Page
Loading...
Need help?
General
