BK Precision 8500 User Manual

Notation
I-set Represents a key on the front panel. Note that some of these may be
accessed in combination with the Shift key.
OFF Annunciator, value, or message shown on the vacuum fluorescent
display.
CONFIG Menu item
OFF
Default menu item
8500 DC Load Series Version: February 4, 2009 Page 5 of 76

BK Precision 8500 Specifications

General

Maximum Power	150 W
Current Range	0-30 A
Load Modes	CC, CV, CR, CP
Input Voltage	100-240 VAC, 50/60 Hz
Voltage Resolution	1 mV
Current Resolution	1 mA
Ripple and Noise (CV)	≤ 10 mVrms
Operating Temperature	0°C to 40°C
Storage Temperature	-10°C to 70°C
Interface	RS232
Display	VFD
Voltage Accuracy	0.05% + 5 mV
Current Accuracy	0.1% + 10 mA
Ripple and Noise (CC)	10 mA rms