BK Precision 8500 - Command Details - Battery Test and Timer Commands; Set Minimum Battery Voltage Command; Read Minimum Battery Voltage and Set LOAD ON Timer Commands; Read LOAD ON Timer and Disable;Enable Timer Commands

Byte
offset
Meaning
7-24 Reserved
0x50 Set timer value of for LOAD ON
Byte
offset
Meaning
3 to 4 2 byte little-endian integer specifying the time in units of 1 second
5-24 Reserved
0x51 Read timer value for LOAD ON
Byte
offset
Meaning
3 to 4 2 byte little-endian integer specifying the time in units of 1 second
5-24 Reserved
0x52 Disable/enable timer for LOAD ON
Byte
offset
Meaning
3 0 is disable timer
1 is enable timer
4-24 Reserved
0x53 Read timer state for LOAD ON
Byte
offset
Meaning
3 0 is disable timer
1 is enable timer
4-24 Reserved
0x54 Set communication address
Byte
offset
Meaning
3 2 byte little-endian integer specifying the address. Must be between 0 and
0xFE, inclusive.
4-24 Reserved
0x55 Enable/disable LOCAL control
Byte
offset
Meaning
3 0 means to disable the Local key on the front panel
8500 DC Load Series Version: February 4, 2009 Page 64 of 76