EasyManuals Logo

BK Precision 9103 User Programming Manual

BK Precision 9103
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
1. USB Interface Connection
Users can remotely control the power supply via PC over the USB interface. Upon installation of
the USB driver, the PC can control the instrument over virtual COM.
Connecting Instrument to PC
a) Download the USB drivers from www.bkprecision.com .
b) Connect the included USB cable to the power supply and the USB port on the PC.
c) When Windows recognizes the USB connection, do not follow the default Windows driver
installation wizard. Simply run the setup file from the downloaded USB drivers and follow
the prompt to install drivers.
d) The computer will recognize the instrument as a USB (virtual COM) device, it will be
detected as a serial COM port. Windows will automatically assign a COM port to the
instrument. Please verify which COM port Windows has assigned by going into Device
Manager.
USB (Virtual COM) Configuration
The following serial port settings are used by the power supply.
Baudrate: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None

Other manuals for BK Precision 9103

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BK Precision 9103 and is the answer not in the manual?

BK Precision 9103 Specifications

General IconGeneral
BrandBK Precision
Model9103
CategoryPower Supply
LanguageEnglish

Related product manuals