Need help?Do you have a question about the BK Precision 9130 and is the answer not in the manual?
General| Model | 9130 |
|---|---|
| Power Rating | 90 W |
| Number of Outputs | 1 |
| Ripple and Noise (CV) | ≤ 1 mVrms |
| Voltage Resolution | 10 mV |
| Current Resolution | 1 mA |
| Output Voltage | 0 to 30 V |
| Output Current | 0-3A |
| Load Regulation | ≤ 0.01% + 3 mV |
| Line Regulation | ≤ 0.01% + 3 mV |
| Ripple and Noise (CC) | ≤ 3 mA |
| Display | LED |
| Interface | USB |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20 to 70 °C |
Safety precautions to observe before using the product and associated instruments.
Measures to ensure operators are protected from electric shock at all times.
Steps to verify the power supply is ready for use, including checking supplied items.
Instructions for connecting power, turning on, and verifying system self-test results.
Procedures to verify basic voltage output functions without load.
Procedures to verify basic current functions with a short across the output terminals.
List of standard commands for instrument control.
Core SCPI commands for system, status, and output control.
Commands specific to the 9130 model for calibration, output, and system control.
Commands for controlling all three channels simultaneously (firmware v1.66+).
Explanation of the power supply's status and condition registers.
Detailed explanations of common IEEE488.2 commands like *CLS, *IDN?.
Details on commands like *PSC, *RST, *SRE, *STB?, and *SAV.
Commands for error reporting, version query, buzzer control, and local/remote modes.
Commands for querying status, enabling event registers, and checking conditions.
Commands to manage operation enable registers and query operation status.
Commands for channel selection, output state control, and timer data.
Commands for setting and querying source current and voltage levels.
Commands for voltage protection, measuring, and display control.
To Next Page