Need help?Do you have a question about the BK Precision 9104 and is the answer not in the manual?
General| Model | 9104 |
|---|---|
| Display Type | LED |
| Type | Linear |
| Output Current | 0 to 5 A |
| Ripple and Noise (CV) | 1 mVrms |
| Ripple & Noise (CC) | 3 mVrms |
| Current Regulation | 0.1% + 3 mA |
| Operating Temperature | 0 - 40 °C |
| Storage Temperature | -20°C to 70 °C |
| Load Regulation | ≤0.01% + 2mV |
| Line Regulation | ≤0.01% + 2mV |
Warns against altering ground connections, operating in explosive atmospheres, or in unsuitable environments.
Describes the layout and functions of the front panel controls and indicators.
Outlines essential safety guidelines for operating the power supply.
Details the Normal Mode operation, including power-on and connecting the DUT.
Introduction to the Transient Mode for generating waveforms like ramp, pulse, etc.
Procedure to activate and deactivate the analog remote control mode.
How to use an external voltage source for remote voltage adjustment.
Guidelines for connecting and disconnecting remote sensing terminals safely.
Explains the Over Voltage Protection feature and how to reset it.
Details the Over Temperature Protection feature and troubleshooting steps.
Describes the Over Current Protection feature and reset procedure.
Technical specifications for output ratings and regulation performance.
Specifications for ripple, noise, AC input, and environmental conditions.
To Next Page
