Need help?Do you have a question about the BK Precision 9103 and is the answer not in the manual?
General| Output Voltage | 0 - 30 V |
|---|---|
| Output Current | 0 - 3 A |
| Power Rating | 90 W |
| Ripple and Noise | 1 mV RMS |
| Display | LED |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20 to 70 °C |
| Line Regulation | ≤0.01% + 3mV |
| Load Regulation | ≤0.01% + 3mV |
Covers power source requirements, grounding for safety, and environmental considerations.
Describes the layout and functions of the instrument's front panel controls and indicators.
Lists critical safety warnings and cautions for operating the power supply.
Details methods for controlling voltage/current via external sources or resistors.
Explains how to connect and control the power supply via a PC using USB.
Guides on connecting and disconnecting remote sensing terminals for accurate output.
Explains OVP, warning display, and reset procedure.
Describes OTP warning, cooling, and fan fault diagnosis.
Details OCP function, warning display, and reset steps.
To Next Page
