Need help?Do you have a question about the BK Precision 9129B and is the answer not in the manual?
General| Output Voltage | 0 - 60 V |
|---|---|
| Output Current | 0-5 A |
| Power Rating | 300 W |
| Output Power | 300 W |
| Display | VFD |
| Dimensions | 214.5 x 88.2 x 354 mm |
| Weight | 6.7 kg |
| Interface | USB, RS232 |
| Remote Sense | Yes |
| Voltage Resolution | 1 mV |
| Current Resolution | 1 mA |
| Ripple and Noise (CC) | <5 mArms |
| Operating Temperature | 0°C to 40°C |
| Ripple and Noise | <5 mVrms |
| Line Regulation | < 0.01% + 3 mV |
| Load Regulation | < 0.01% + 3 mV |
| Ripple & Noise | <5 mVrms |
| Line Regulation (CV) | < 0.01% + 3 mV |
| Display Type | LCD |
| Storage Temperature | -10°C to 70°C |
| Load Regulation (CV) | ≤0.01% + 3 mV |
Defines IEC 61010 safety category ratings (I, II, III, IV) and their meanings for electrical environments.
Covers AC input voltage, frequency, and necessary fuse specifications for the instrument.
Guides users on how to select the correct AC line voltage (110V or 220V) for operation.
Explains how to connect loads to the DC output terminals on the front panel.
Outlines steps for verifying AC input and performing a self-test upon initial power-up.
Details how to verify basic voltage and current output functionality.
Explains how to access and navigate the instrument's built-in menu system for configuration.
Guides on setting voltage limits to protect the DUT and the power supply.
Provides steps to set the desired output voltage and current values for each channel.
To Next Page