Need help?Do you have a question about the BK Precision 9200B Series and is the answer not in the manual?
General| Number of Outputs | 1 |
|---|---|
| Programming Resolution Voltage | 1 mV |
| Readback Resolution Voltage | 1 mV |
| Voltage Resolution | 1 mV |
| Display Type | LCD |
| Operating Temperature | 0°C to 40°C |
| Type | DC Power Supply |
| Output Current Range | 0-3A |
| Ripple and Noise | < 1 mVrms / 3 mVpp (Voltage), < 3 mArms (Current) |
| Ripple & Noise (CV) | <1 mVrms / 3 mVpp |
| Ripple & Noise (CC) | <3 mArms |
| Interface | USB |
Defines safety category ratings based on IEC 61010 and their implications for measurement environments.
Describes the 9200B Series power supplies, their features, and communication interfaces.
Lists all items included in the power supply shipment and instructions for inspection.
Provides physical dimensions for the 9201B/9202B and 9205B/9206B models.
Details how to install the instrument in a standard 19-inch rack using an optional kit.
Provides an overview and description of the instrument's front panel components.
Explains the function of each key on the instrument's keypad.
Details the connectors and components on the rear panel of the instrument.
Explains the indicators and their meanings on the instrument's VFD display.
Covers AC input voltage requirements and necessary fuse specifications for operation.
Instructions for selecting the correct AC line voltage for the instrument.
Details how to connect loads to the DC output terminals safely and correctly.
Steps to verify AC input and perform a self-test before operating the instrument.
Lists and describes the main menu options and parameters configurable on the instrument.
Guide on how to set the output voltage and current levels using the front panel.
Explains remote sense functionality for compensating voltage drops in output leads.
How to toggle between set and measured values on the display.
Accessing and navigating the SYSTEM menu for instrument configuration.
Configuring list mode for creating and executing sequences of output steps.
Setting and enabling the Overvoltage Protection (OVP) feature.
How to lock and unlock the front panel keys to prevent unauthorized changes.
Using the built-in digital voltmeter to measure DC voltages.
Configuring RS-232 and USB interfaces for remote control.
Defines symbols and formats for SCPI parameters used in commands.
Explains the different status registers and their meanings.
Lists and describes common SCPI commands for instrument control.
Details commands for querying and configuring status subsystems.
Commands for querying system errors and status.
Commands for managing trigger sources and immediate triggers.
Commands for controlling output state, timer, current levels, and protection.
Commands for measuring voltage, current, power, and DVM values.
Commands for setting up, loading, editing, and saving list sequences.
Answers common questions regarding power-up and operating modes.
Addresses issues related to RS232 communication and command response.
To Next Page