Changing Ammeter to Wattmeter.
This function is only valid when the output on/off is set to on.
a) Press Output ON/OFF to ON.
b) Press the “Shift”/ (Manual) key and then press the “Lock/Unlock” key.
c) Note the orange “W” next to the green “CV” to indicate the power in watts is being
displayed.
d) To change from Wattmeter to Ammeter, press the “Shift” key and then press
“Lock/Unlock” key.
The Key Lock button
a) Press the “Lock/Unlock” key to lock or unlock all function keys and the control knob on
front panel.
b) The “Lock/Unlock” key lights up when the keys are locked.
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
