Name: BK Precision 9130
Brand: BK Precision
Rating: 4 (1 reviews)

To Next Page

To Previous Page

5.4.2 SCPI Command Description

Common IEEE488.2 Commands

*CLS

This command clears the following registers：

 Standard event status register

 Quest condition register

 Operation status register

 Operation status sub register

 Status byte register

 Error code

Command syntax: *CLS

Parameter: None

*ESE

This command sets the parameter of the standard event enable register. The value determines which bit

value of the standard event register is set to 1. The ESB bit in of the status byte register will change to 1 to

reflect the changes.

Command syntax: *ESE <NRf>

Parameter: 0~255

Reset value: Consult *PSC command

Example: *ESE 128

*ESR?

This command queries the standard event status register. After executing this command, the standard event

status register is reset. The bit definition of the standard event status register is identical to the standard

event status enable register

Query syntax: *ESR?

Return parameter: <NR1>

Example: *ESR?

*IDN?

This command reads information about the power supply. The return value contains 4 segments divided by a

comma.

Query syntax: *IDN?

Return parameter: <AARD> segment description

BK Precision manufacturer

XXXX model

XXXXXX product serial number

Questions and Answers:

Need help?

Do you have a question about the BK Precision 9130 and is the answer not in the manual?

BK Precision 9130 Specifications

General