BK Precision 9115 Programming Manual

Parameter: Parameter1 represents the number of step to be edited.Parameter2 is the current
(MIN~MAX).
Query syntax: SEQuence:CURRent? <NR1>
Return parameter: MIN~MAX
SEQuence:WIDTh
This command is used to edit the width of specified step of the sequence file .
Command syntax: SEQuence:WIDTh <NR1><,NRf>
Parameter: Parameter1 represents the number of steps to be edited.Parameter2 is the time
width (0.001~65.535).
Unit: s
Query syntax: SEQuence: WIDTh? <NR1>
Return parameter: 0.001~65.535
SEQuence:SLOPe
This command is used to edit the slope of a specified step of the sequence file
Command syntax：SEQuence:SLOPe <NR1>,<NRf>
parameter： Parameter1 represents the number of steps to be edited.Parameter2 is the
slope(0.001~65.535).
unit: s
Query syntax: SEQuence:SLOPe? <NR1>
Return parameter: 0.001~65.535
SEQuence:SAVe
This command is used to save the sequence file.
Command syntax: SEQuence:SAVe
Parameter:None

BK Precision 9115 Specifications

General

Brand	BK Precision
Model	9115
Category	Power Supply
Language	English