2.
Tap .
3. Do any of the following:
• To turn o all connections at once, in the Wireless & networks section, tap More. Turn on the Airplane mode
switch.
• To turn o a Wi-Fi connection, tap Wi-Fi. Turn o the switch.
• To delete a saved Wi-Fi network, tap Wi-Fi. Tap a Wi-Fi network, and then tap Forget.
Using Battery saver mode
You can set up Battery saver mode to turn on automatically and help make your battery last longer when you need it most!
When Battery saver mode is turned on, your device conserves battery power by limiting vibration, location services, and
background data capabilities. If you want to save more battery power, you can adjust more settings.
By default, Battery saver mode turns o automatically when your device is plugged into a power source.
Note: When Battery saver mode is turned on, some applications and messaging services that rely on syncing might not
update unless you open them.
Change when Battery saver mode turns on
1. Swipe down from the top of the screen once using two fingers, or twice using one finger.
2.
In the upper-right corner of the screen, tap > .
3. Tap Battery saver > Turn on automatically.
4. Tap an option.
Turn o Battery saver mode
Battery saver mode is automatically turned o when you start charging your device. You can also turn o Battery saver
mode manually.
1. Swipe down from the top of the screen once using two fingers, or twice using one finger.
2.
Tap Battery saver.
Device and battery safety
You should use only the battery that BlackBerry specifies for use with your particular BlackBerry device model. If you use
any other battery, you might invalidate any warranty provided with your device.
CAUTION: There is a risk of explosion if the battery is replaced with an incorrect battery type. Do not try to replace your
nonremovable battery. Only qualified service personnel should perform repairs or battery replacements in your device.
User Guide Settings
103
To Next Page
