Change the APN settings for your default Internet connection
Your device uses Access Point Name (APN) settings to open a data connection with your service provider's wireless
network. You might need to change your APN settings if you change your wireless service plan or if the default settings
don't apply to your service provider. Depending on your service provider, you might not be able to change the APN settings.
1. Swipe down from the top of the screen once using two
fingers, or twice using one finger.
2.
Tap > More > Cellular networks > Access Point Names.
3. Do one of the following:
• To create a new APN, tap .
• To change an existing APN, tap an APN.
4. Complete the
fields. If you don't have the required information, contact your service provider.
5.
Tap > Save.
To reset the default APN settings, tap > Reset to default.
Set a preferred network type
1. Swipe down from the top of the screen once using two
fingers, or twice using one finger.
2.
Tap > More > Cellular networks > Preferred network type.
3. Tap the type of network you prefer.
Roaming
Roaming is designed to let your device send data over other service provider networks when you travel outside of your
service provider's wireless coverage area. In most cases, your device connects automatically to the appropriate wireless
network. In some cases, you must contact your service provider to have your SIM card or device properly provisioned. If
you're not sure if your device is set up for roaming, or what roaming fees apply, it's a good idea to check with your service
provider before you travel.
Switch wireless networks manually
Your device is designed to switch to an appropriate wireless network automatically when you travel, but you might need to
try switching networks manually if you have having trouble connecting or if the network signal is weak.
1. Swipe down from the top of the screen once using two
fingers, or twice using one finger.
2.
Tap > More > Cellular networks > Network operators.
3. Do one of the following:
• To switch to an available network automatically, tap Choose automatically.
User Guide Settings
76
To Next Page
Loading...
