Set up tap and pay
To set up the tap and pay feature, you must install at least one payment app on your device.
1. Swipe down from the top of the screen once using two fingers, or twice using one finger.
2.
Tap > Tap & pay.
3. Do any of the following:
• To set a default payment app, tap the payment app.
• To set up the tap and pay feature to use the payment app that is open and in the foreground, turn on the Favor
foreground app switch.
Turn o NFC
By default, NFC is turned on. When NFC is turned on, other features are also turned on including Android
™
Beam and Tap
and Pay. If you turn o NFC, other features that use NFC also turn o.
Default NFC settings might vary depending on your service provider or administrator settings.
1. Swipe down from the top of the screen once using two
fingers, or twice using one finger.
2.
Tap > More > NFC.
3. Turn o the Turn on NFC switch.
Turn o Android
™
Beam
You can turn o the Android
™
Beam feature and continue to use other NFC features. You can also still receive NFC file
transfers. Android
™
Beam turns o automatically when you turn o NFC.
1. Swipe down from the top of the screen once using two fingers, or twice using one finger.
2.
Tap > More > NFC.
3. Turn o the Turn on Android Beam switch.
Tethering and mobile hotspot
Internet tethering
Internet tethering allows you to share your device's connection to the mobile network with one other device, such as a
laptop or tablet. You can connect the other device to your BlackBerry device using a USB cable or, if both devices are
Bluetooth enabled, you can use Bluetooth technology instead.
Additional charges might apply for using Internet tethering.
User Guide Settings
91
To Next Page
Loading...
