About Always-on mode
Some virtual private networks (VPNs) support Always-on mode. If Always-on mode is turned on and your device loses its
VPN connection, your device stops sending or receiving data until Always-on mode re-establishes the VPN connection
automatically.
Your device uses your login information to connect automatically to a VPN
profile that is set up to use Always-on mode.
When connected, your device displays a notification in the notification drawer. The notification tells you the status of the
VPN connection.
Turn on Always-on mode for a VPN profile
The first time you connect to a virtual private network (VPN), save your username and password.
1. Swipe down from the top of the screen once using two fingers, or twice using one finger.
2.
Tap > More > VPN.
3.
Tap > Always-on VPN.
4. Tap a VPN profile.
5. Tap OK.
To turn o Always-on mode, on the VPN screen, tap > Always-on VPN > None > OK.
Emergency broadcast messages
When you set up the emergency broadcast messages feature, public warning messages (SMS or MMS) are sent to your
device to warn you of possible threats to safety in your area. Examples of emergency broadcast messages include severe
weather warnings, missing child alerts, and national emergencies.
Depending on your service provider, emergency broadcast messages don't contribute to data usage in your wireless
service plan.
You can view emergency broadcast messages that you receive from the Advanced settings screen in the Messenger app.
This feature might not be supported, depending on your region, service provider, or wireless network. For more information,
contact your service provider or administrator.
Turn
o emergency broadcast messages
1. Swipe down from the top of the screen once using two fingers, or twice using one finger.
2.
Tap > More > Emergency broadcasts.
3. Select the checkbox for the type of public warning you want to turn o.
User Guide Settings
95
To Next Page
Loading...
