Black+Decker BEW230 - Specific Operational Guidance; Maintenance and Technical Data; Tool Maintenance; Technical Data

6
ENGLISH
(Original instructions)
u Removethescrew(7).
u Reverseorreplacethewornpart.
u Fit and tighten the screw.
Finger attachment (g. D)
Thengerattachmentisusedfornedetailsanding.
u Removethescrew(7).
u Removethediamond-shapedtipholder(4)fromthe
sanding base.
u Fitthengerattachment(6)ontothesandingbase.
u Fit and tighten the screw.
u Fittheappropiatesandingsheet(11)ontothenger
attachment.
Use
Warning! Letthetoolworkatitsownpace.Donotoverload.
Warning!Donotcovertheventilationslotswhenusingthe
tool.Holdthetoolasshowning.H.Makesurethatthe
sandingbaseisatontheworkpiece.
Connecting a vacuum cleaner (g. F)
Thetoolhasanadaptortoconnectittoavacuumcleaner
whensandingwood.Toconnectthetooltoavacuumcleaner,
proceedasfollows:
Warning! Make sure that the tool is switched off and
unplugged.
u Fit the dust extraction connector (2) onto the adapter at
the back of the tool.
u Connectthehoseofasuitablevacuumcleanertothe
connector.
Switching on and off (g. G)
Warning! Before connecting the tool to the power supply,
make sure it is switched off.
u Toswitchthetoolon,pressthepartoftheon/offswitch(1)
marked 'I'.
u Toswitchthetooloff,pressthepartoftheon/offswitch(1)
marked '0'.
Accessories
The performance of your tool depends on the accessory used.
BLACK+DECKERaccessoriesareengineeredtohighquality
standards and designed to enhance the performance of your
tool.Byusingtheseaccessoriesyouwillgettheverybest
from your tool.
Maintenance
Your BLACK+DECKER tool has been designed to operate
overalongperiodoftimewithaminimumofmaintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Yourchargerdoesnotrequireanymaintenanceapartfrom
regular cleaning.
Warning! Before performing any maintenance on the tool,
removeunplugthechargerbeforecleaningit.
u Regularlycleantheventilationslotsinyourtoolusinga
soft brush or dry cloth.
u Regularly clean the motor housing using a damp cloth. Do
notuseanyabrasiveorsolvent-basedcleaner.
Mains plug replacement (U.K. & Ireland only)
Ifanewmainsplugneedstobefitted:
u Safely dispose of the old plug.
u Connectthebrownleadtotheliveterminalinthenew
plug.
u Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Followthefittinginstructionssuppliedwithgoodqualityplugs.
Recommendedfuse:5A.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Productsandbatteriescontainmaterialsthatcanberecov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
localprovisions.Furtherinformationisavailableat
www.2helpU.com
Technical data
BEW230
Input voltage V
AC
230
Power input W 55
No-load speed min
-1
11,000
Weight kg 0.8
Level of sound pressure according to EN 62841:
Sound pressure (L
pA
) 65 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 76 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 62841:
(a
h
)12.5m/s
2
,uncertainty(K)1.5m/s
2