22
EN
Problem Possible Cause Solution
LED on receiver
flashes rapidly
and quadcopter
will not respond to
transmitter (during
binding)
Transmitter too near
aircraft during binding
process
Power off the transmitter. Move
the transmitter a larger distance
from the aircraft. Disconnect and
reconnect the ight battery to
the aircraft. Follow the binding
instructions
Bind switch or button
was not held while
transmitter was
powered on
Power off transmitter and
repeat bind process
Aircraft or transmitter is
too close to large metal
object, wireless source
or another transmitter
Move aircraft and transmitter
to another location and attempt
binding again
To Next Page
Loading...
