20
-
Cooking with immediate start and pro-
grammed duration
- Select the desired cooking mode and adjust the
temperature (see paragraph: immediate cooking).
Example: position
Temperature 200°C.
- Press the touch control until the icon
cooking time indicator starts to flash.
The display flashes 0:00 to indicate that you can
now adjust the setting.
- Move the setting selector toward +
or - to
choose the desired time.
Example: 25 min cooking time.
The cooking time is automatically recorded after
a few seconds -> the display no longer flashes
and again shows the temperature.
The countdown of the length of time begins
immediately after it has been set.
A
fter these three steps, the oven heats up:
A series of beeps will be emitted when the oven
reaches the selected temperature.
At the end of cooking (end of programmed time),
- The oven stops,
- The cooking time indicator turns off,
- 0:00 is displayed
- A series of beeps is emitted for a few
minutes.
The beeps are definitively deactivated by retur-
ning the function selector to 0.
HOW TO SET A COOKING PROGRAMME
•
HOW TO USE YOUR LOWER OVEN
To Next Page
Loading...
