Blanco BODE 62X User Manual

• The bulb is located on the ceiling of
your oven's cavity.
a) Unscrew the view port (see adja-
cent diagram).
b) Unscrew the light bulb in the same
direction.
Bulb specifications:
- 15 W
- 220-240 V
- 300°C
- E 14 cap
c) Replace the bulb then reposition
the view port and reconnect your
oven.
Bulb
Unscrew
View port
Tip
To unscrew the view port and the light, use a rubber glove, which will make disas-
sembly easier.
HOW TO CHANGE THE BULBS
•
CLEANING AND MAINTENANCE
Warning
Make sure the appliance is disconnected from the power before replacing the lamp
in order to avoid the risk of electric shock. Change the lamp only when the appliance has
cooled down.
Bulb fitting
Unscrew
Cover
•
The bulb is located on the ceiling of your
oven’s cavity.
- Unscrew the the protective shade (see
diagram).
- Unscrew the bulb in the same direc-
tion.
A bulb is used:
- 15 W
- 220-240 V
- 300°C
- E 14 screw-fitting bulb
- Change the bulb, replace the shade
and switch your oven back on at the
mains.
ON THE UPPER OVEN :
ON THE LOWER OVEN
25

Blanco BODE 62X Specifications

General

Brand	Blanco
Model	BODE 62X
Category	Oven
Language	English