During heating, the centigrade degree (°) symbol flashes to indicate that the oven is heating.
When the pre-set temperature is reached, the buzzer sounds and the symbol (°) remains on.
R
esidual
Heat
While cooking food, the structure of the oven stores heat. This heat is kept isolated from the rest of the
kitchen thanks to an excellent insulation system and certain construction details.
The heat is gradually dispersed and can be used as a further cooking resource if managed appropriately: the
control indicates the interior temperature, after the oven has been switched off, until it reaches 50°C
Important
Use this feature to keep food warm or to gently complete the cooking
pr
ocess.
Oven
Light Contr
ol
In order to achieve the best results in terms of performance and energy
consumption,
this function is
automatically managed by the oven during its functioning. If you
want
to turn it on at any time, just touch
any active button on the control panel.
Functioning of the Clock
Minute-counter
Start - When the button is pressed the symbol turns on
(flashing)
and
“00.00”
appears on
the display with the dot flashing.
Set - The time can be set (max 23h59’) using the “+” and “-”
buttons.
Confirm - The time set is automatically accepted if you press the oven timer button
or
if no keys are
pressed for 3 seconds: in this case, the symbol and the dot
stop
flashing.
Minute-counter -The relative symbol is lit as long as this function is active. This
func
tion is independent of
the functioning of the oven (it can even be used if
end-of-cook
ing programming is running).
End time set - When the count-down is finished, the buzzer sounds and the relative symbol flashes. If you
press one of the buttons, it turns off, or automatically turns
of
f
after 3 minutes.
Programmed Cooking
Time
Start – Enter the oven function and
confirm.
Press two times, lights up and the letters ‘ Dur’ intermittently appear on the display.
Set – The time can be regulated using the “+” and “-”
buttons.
To Next Page
Loading...
