EasyManua.ls Logo

Blanco BOSE609T - Safety Lock Function

Blanco BOSE609T
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
English
Confirm The time set is automatically accepted after no buttons are pressed for 3 seconds: in this
case, the digits and the dot stop flashing. The relative
symbol
remains lit. The display
alternatively shows the time and the temperature with the centigrade degree symbol flashing.
Cooking duration The relative symbol remains lit as long as the function is active.
Once the cooking duration function is activated, it remains on as long as the
cooking
selected remains the
one on which the cooking duration was set.
End cooking - When cooking is finished, the programmed cooking symbol flashes until another
active button is touched and the buzzer sounds for 3 minutes.
Delayed
Cooking
Start Enter the oven function and
confirm.
Press two times, lights up and the letters Dur intermittently appear on the display.
Set cooking duration The cooking duration time can be regulated using the two
“+”
and -
buttons.
Press again. The symbol continues to flash and the letters End (end
cooking
time) appear
on the display.
Set end cooking time The end cooking time can be regulated using the two “+” and
-
buttons.
Confirm The time set is automatically accepted if you press the oven Timer
button
or if no keys are
pressed for 3 seconds: in this case, the digits and the dot
stop
flashing. The relative symbol
remains lit. The display alternatively shows the time.
Start cooking
The
oven turns on at the desired time (end cooking time minus
cooking
duration); as long as
the function is active the relative symbol remains lit. The display alternatively shows the time and
the temperature with the centigrade degree symbol flashing.
End cooking - When cooking is finished, the programmed cooking symbol flashes until another
active button is touched and the buzzer sounds for 3 minutes.
Safety Lock
Function
The key (or child lock) function is activated/deactivated by holding down the key for at least 5
seconds: The command responds by displaying the key symbol
(as per below image of the key)
alternating with the
clock.
When the key function is active, all oven operations are inhibited and indicated by the triple-flashing of the
symbol.

Related product manuals