31
DEUTSCH
ENGLISCH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
ITALIANO
NEDERLANDS
SVENSKA
NORGE
SUOMI
TÜRKÇE
Volume control
The car audio system volume can be
adjusted to levels from 0 (off) to 66
(maximum).
➮ To increase the volume, turn the
volume control knob 3 to the right.
➮ To decrease the volume, turn the
volume control knob 3 to the left.
“VOL” and the set value appear on the
display B.
Mute
You can reduce the volume of the car
audio system immediately (mute).
➮ Press 4 briefly.
Selecting the mute level
It is possible to select the mute level.
➮ Press MENU ?.
➮ Press or > repeatedly until
“MUTE LVL” appears in the display
B.
➮ Press > to select the mute
level.
“MUTE” and the set value appear on
the display B.
➮ Once you have made your selec-
tion, press MENU ? twice.
Outputting telephone
announcements
If your car audio system is equipped with
a mobile telephone, it will automatically
switch to mute when there is an incom-
ing call or when you place a call and
you will hear the caller via the car speak-
ers. While the telephone call is in
progress, this option will appear in the
display B. This will not work unless the
mobile phone is connected to the car
audio system as described in the instal-
lation instructions.
Outputting microphone
announcements
You have the option of connecting two
external microphones to the unit.
Microphone 1 is for use by the driver
and microphone 2 for use by the tour
representative. Microphone 1 always
has priority over microphone 2. Audio
source playback is interrupted as soon
as a microphone is switched on. Audio
source playback continues as soon as
the microphone is switched off again.
Setting the volume for microphone
announcements
To set the volume for microphone
announcements,
➮ turn the volume control 3 in
microphone mode to the left or
right to either decrease or increase
the volume.
Adjusting beep on or off
For a number of functions you will hear
a beep if you press a key for a longer
time. It is possible to switch off this beep.
➮ Press MENU ?.
➮ Press or > repeatedly until
“BEEP ON” or “BEEP OFF” ap-
pears in the display B.
➮ To switch this function on or off,
press
or >.
➮ Once you have adjusted the set-
tings, press MENU ?.
VOLUME CONTROL