38
Switching over the tuner
➮ Select the FM waveband.
➮ Switch off the car radio.
➮ Press and hold buttons 1 and 3 @
and switch the radio back on again.
“SERVICE” and the frequency wave-
band will then appear in the display B.
➮ Press MENU ?.
➮ Press > repeatedly until “FM
TUNER” appears in the display B.
➮ Press > to select the “EU-
ROPE” or “AMERICA”.
➮ Once you have made your selec-
tion, press MENU < twice.
➮ To end the tuner switchover, switch
the radio off and then on again.
Traffic information
Switching traffic information
priority on/off
➮ Press TRAFFIC A.
Traffic information priority is activated
when “TA” lights up in the display B.
Note:
You will hear a warning beep
• if you are listening to a radio traffic
station or a cassette, leave the
reception area of the traffic
information station you are tuned
into and the automatic seek tuning
function is unable to find another
traffic information station.
• if you switch from a traffic informa-
tion station to a station which does
not broadcast traffic information.
Then either switch off traffic information
priority or switch to a different traffic in-
formation station.
Adjusting the volume for traffic
announcements
➮ Press MENU ?.
➮ Press or > repeatedly until
“TAVOLUME” appears in the dis-
play B.
➮ Press > to adjust the traffic
announcement volume.
➮ Once you have adjusted the set-
ting, press MENU ? twice.
RADIO OPERATION
TRAFFIC INFORMATION
To Next Page
Loading...
