32
Adjusting the tone
Adjusting the bass
➮ To adjust the bass, press AUDIO
=.
“BASS” and the set value appear on the
display B.
➮ Turn the volume control 3 to
adjust the bass setting. Turn
clockwise or anti-clockwise to raise
or lower the bass.
Adjusting the treble
➮ To adjust the treble, press AUDIO
=.
“BASS” and the set value appear on the
display B.
➮ Press AUDIO = again.
“TREB” and the set value appear on the
display B.
➮ Turn the volume control 3 to
adjust the treble setting. Turn
clockwise or anti-clockwise to raise
or lower the treble.
Switching Loudness on/off
Loudness boosts the bass and treble
when the volume is low to create a more
natural sound.
➮ Press AUDIO = for approx. two
seconds.
LD will light up in the display B to indi-
cate that Loudness is active.
Adjusting Loudness intensity
The Loudness boost can be set in
stages from one to six.
➮ Press MENU ?.
➮ Press or > repeatedly until
“LOUDNESS” appears in the dis-
play B.
➮ Press or > to alter the Loud-
ness setting.
➮ Once you have completed adjust-
ing the settings, press MENU ?
twice.
TONE
To Next Page
Loading...
