24
To repeatedly play the entire directory,
press the 4 RPT button 9 once or sev-
eral times until "RPT DIR" is displayed.
The display shows the REPEAT symbol.
Cancelling Repeat
To stop the current track or current direc-
tory from being repeated,
press the 4 RPT button 9 once or sev-
eral times until "RPT OFF" is displayed.
The REPEAT symbol disappears from the
display.
Interrupting playback (PAUSE)
To stop the playback,
press the 3
button 9.
"PAUSE" appears on the display.
Cancelling pause
During the pause, press the button 3
9.
Playback is continued.
쏅
쏅
쏅
쏅
CD-changer mode
Notes:
Before connecting a CD changer,
check the mode of the AUX input on
the rear side and, if necessary, se-
lect the setting "CDC ON". For fur-
ther details, please read the section
"Adjusting the rear AUX input mode"
in the chapter "External audio sourc-
es".
Information on handling CDs, insert-
ing CDs and operating the CD changer
can be found in the operating instruc-
tions supplied with your CD changer.
Switching to CD changer mode
Press the SRC button 2 repeatedly
until the display shows "CDC / AUX".
The device starts playing the fi rst CD that
the CD changer detects.
Selecting CDs
To move up or down to another CD,
press the
or 4 button once or
several times.
Note:
The device will ignore empty CD slots in
the changer and slots containing invalid
CDs.
Selecting tracks
To move up or down to another track on the
current CD,
press the
or 4 button once or
several times.
•
•
쏅
쏅
쏅
MP3/WMA mode CD-changer mode
01_NewOrleansMP58us_gb.indd 2401_NewOrleansMP58us_gb.indd 24 12/28/07 2:03:27 PM12/28/07 2:03:27 PM
To Next Page
Loading...
