31
ENGLISH
Press the or button 4 to switch
between the setting options "GAIN"
(level) and "FREQ" (cut-off frequency).
Press the
button 4 to open the
menu.
Set the level and cut-off frequency with
the
or button 4.
When you have fi nished making your chang-
es,
press the ESCAPE button ;.
쏅
쏅
쏅
쏅
X-BASS
X-Bass allows you to increase the bass at
low volume.
The selected X-Bass setting is effective for
all audio sources (radio, CD, CD changer,
USB or AUX).
For X-BASS, either the basic function
X-BASS boost or the equalizer X-BASS
(E-XBASS) is available. The basic function
allows you to adjust the X-BASS boost. The
equalizer X-BASS also allows you to select
an X-BASS frequency.
Adjusting X-BASS boost
(X-BASS)
The X-BASS increase can be set in incre-
ments of 0 to 3.
"0" means that the X-BASS function is
switched off.
Press the X-BASS button 3.
"X-BASS" appears on the display.
Press the
button 4 to open the
menu.
Press the
or button 4 to adjust
the X-BASS boost.
To exit the menu,
press the ESCAPE button ;.
Adjusting equalizer X-BASS
(E-BASS)
You can adjust an increase between 0
(X-Bass function off) and 3 for X-Bass. You
can select whether the increase should af-
fect the entire X-BASS frequency range
(setting "FLAT") or purposefully only one
of three X-BASS frequencies (400 Hz,
800 Hz, 2400 Hz).
쏅
쏅
쏅
쏅
Preamplifi er output X-Bass
01_NewOrleansMP58us_gb.indd 3101_NewOrleansMP58us_gb.indd 31 12/28/07 2:03:30 PM12/28/07 2:03:30 PM
To Next Page
Loading...
