29
ENGLISH
Adjusting equalizer bass
(E-BASS)
You can select 1 of 4 bass frequencies
(60 Hz, 80 Hz, 100 Hz, 200 Hz) and set the
quality factor between 1.0 and 2.0.
Note:
For further information on setting the
bass level, please read the section enti-
tled "Adjusting the bass (BASS)" in this
chapter.
Adjusting bass frequency and quality
factor
Press the AUD button =.
"BASS" appears on the display.
Press the
or button 4 repeat-
edly until "ENHANCED MENU" appears
on the display.
press the
button 4.
"E-BASS" appears on the display.
Press the
button 4 to open the
E-Bass menu.
"FREQ" appears on the display.
Press the
or button 4 to change
between the setting options "FREQ"
(bass frequency) and "QUALITY" (qual-
ity factor).
Press the
button 4 to open the
menu.
Set the bass frequency and quality fac-
tor each with the
or button 4.
When you have fi nished making your chang-
es,
press the ESCAPE button ;.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Adjusting equalizer middle
(E-MIDDLE)
You can select one of 4 middle frequencies
(500 Hz, 1,000 Hz, 1,500 Hz, 2,500 Hz)
and set the level for the selected frequency
between -7 and +7. You can also set the
quality factor between 0.5 and 1.25.
Adjusting middle frequency, level and
quality factor
Press the AUD button =.
"BASS" appears on the display.
Press the
or button 4 repeat-
edly until "ENHANCED MENU" appears
on the display.
Press the
button 4.
"E-BASS" appears on the display.
Press the
or button 4 repeat-
edly until "E-MIDDLE" appears on the
display.
Press the
button 4 to open the
E-Middle menu.
"GAIN" appears on the display.
Press the
or button 4 to switch
between "GAIN" (level), "FREQ" (mid-
dle frequency) and "QUALITY" (quality
factor).
Press the
button 4 to open the
menu.
Set the level, middle frequency and
quality factor each with the
or
button 4.
When you have fi nished making your chang-
es,
press the ESCAPE button ;.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Sound
01_NewOrleansMP58us_gb.indd 2901_NewOrleansMP58us_gb.indd 29 12/28/07 2:03:29 PM12/28/07 2:03:29 PM
To Next Page
Loading...
