34
When you have fi nished making your chang-
es,
press the MENU•OK button 5.
Press the ESCAPE button ; to exit
the menu.
Selecting a display illumination during a
colour scan
Press the MENU•OK button 5.
Press the
or button 4 repeatedly
until "DISPLAY MENU" appears on the
display.
Press the
button 4 to open the
menu.
Press the
or button 4 repeatedly
until "COLOUR SCAN" appears.
Press the
button 4 to start the col-
our seek.
The device starts changing the display illu-
mination colour.
To select the currently set colour,
press the MENU•OK button 5.
With the
button 4, you can start the
colour seek again and select a different col-
our.
If you found and selected the desired col-
our,
press the ESCAPE button ;.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Switching the constant colour change
for the display illumination on/off
(SCAN)
You can select a constant colour change as
the colour of the display illumination. If the
colour change is activated, the display col-
our changes constantly. The colour change
is switched on or off in the menu.
Press the MENU•OK button 5.
Press the
or button 4 repeatedly
until "DISPLAY MENU" appears on the
display.
Press the
button 4 to open the
menu.
Press the
or button 4 repeatedly
until "CONTSCAN ON" or "CONTSCAN
OFF" appears on the display.
Press the
or button 4 to toggle
between ON (colour change on) and
OFF (colour change off).
When you have fi nished making your chang-
es,
press the ESCAPE button ;.
Adjusting the display viewing
angle
The angle at which you, the driver, looks at
the display is dependent upon, among oth-
er things, the installation position of the de-
vice and your seating position and physical
size. You can increase or decrease the dis-
play contrast to perfectly read the display
from your viewing angle.
Press the MENU•OK button 5.
Press the
or button 4 repeatedly
until "DISPLAY MENU" appears on the
display.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Adjusting the display settings
01_NewOrleansMP58us_gb.indd 3401_NewOrleansMP58us_gb.indd 34 12/28/07 2:03:32 PM12/28/07 2:03:32 PM
To Next Page
Loading...
