Blaupunkt New Orleans MP58 - Display Illumination Customization; Mixing Display Colors; Color Scan and Constant Color Change

39
ENGLISH
Restoring factory settings
(NORMSET)
You can restore the original factory settings
of the device.
Press the MENU•OK button 5.
Press the
or button 4 repeatedly
until "VARIOUS MENU" appears on the
display.
Press the
button 4 to open the
menu.
Press the
or button 4 repeatedly
until "NORMSET" appears.
Press the
button 4 to open the
menu.
Press the
button 4 repeatedly un-
til "NORMSET ON" appears on the dis-
play.
The device switches off and immediately
on again. All settings are returned to the
factory settings.
Note:
If you do not press and hold the
but-
ton 4 long enough, "NORMSET OFF"
appears on the display. In this case,
your individual settings remain intact
and the device remains switched on.
You can exit the menu with the ESCAPE
button ;.
쏅
쏅
쏅
쏅
쏅
쏅
Restoring factory settings
Factory settings:
Power-on volume
(On Volume)
20
Volume of muting
(MUTE LEVEL)
0
Volume of telephone/
navigation announce-
ment (TEL VOLUME)
10
Seek tuning sensitivity
(SENSITIVITY)
HI
Scan time (SCAN TIME) 10
Time display (CLOCK) OFF
Time (CLOCK SET) 12:00
Time display mode
(CLOCK MODE)
12HR
Confi rmation beep
(BEEP)
ON
Mode of rear AUX input
(CDC)
OFF
External audio source
(AUX)
OFF
Display brightness DIM DAY 15,
DIM NIGHT
12
01_NewOrleansMP58us_gb.indd 3901_NewOrleansMP58us_gb.indd 39 12/28/07 2:03:34 PM12/28/07 2:03:34 PM