33
ENGLISH
Adjusting the display
settings
Adjusting the display brightness
If your car sound system is installed as de-
scribed in the installation instructions and
your vehicle features the corresponding
connection, the display brightness for day
and night is switched by switching the ve-
hicle lighting on or off. You can adjust the
display brightness separately for night and
day in steps ranging from 1 - 16.
Press the MENU•OK button 5.
Press the
or button 4 repeatedly
until "DISPLAY MENU" appears on the
display.
Press the
button 4 to open the
menu.
Press the
or button 4 repeatedly
until "DIM DAY" or "DIM NIGHT" appears
on the display.
Press the
button 4 to open the
menu.
Press the
or button 4 to switch
between the brightness levels.
When you have fi nished making your chang-
es,
press the ESCAPE button ;.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Setting the display illumination
colour
For the display illumination, you can se-
lect a colour from the RGB spectrum (red-
green-blue) or mix using the colours red
and green, select a colour during the col-
our scan or switch on a constant colour
change.
Mixing a colour for the display
illumination
To customise the display illumination to suit
your tastes you can mix a colour yourself
using the three primary colours red, green
and blue (RGB).
Press the MENU•OK button 5.
Press the
or button 4 repeatedly
until "DISPLAY MENU" appears on the
display.
Press the
button 4 to open the
menu.
Press the
or button 4 repeatedly
until "USER COLOUR" appears.
Press the
button 4 to open the RGB
menu.
"R", "G", and "B" are displayed with the cur-
rent values. The setting for "R" is activated.
You can adjust a value from 0 to 16 each for
every colour component.
Press the
or button 4 to adjust
the value of a colour component.
Press the
or button 4 to switch
between the colour components.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Adjusting the display settings
01_NewOrleansMP58us_gb.indd 3301_NewOrleansMP58us_gb.indd 33 12/28/07 2:03:31 PM12/28/07 2:03:31 PM
To Next Page
Loading...
