INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEXSETUPCD CHANGER
18
✔ The software is loaded from the CD. The progress is indicated in the
display.
Note: The process of loading the software from the navigation CD
must not be interrupted.
Starting navigation
1 Press the NAV button ? whilst the unit is switched on.
✔ The main navigation menu opens. If a navigation session is already ac-
tive, the navigation display will appear.
Before navigation can begin, a DX navigation CD must first be inserted in the
unit and a destination selected.
Entering a destination
The destination can be entered from the destination memory or by entering a
town, a town centre, a road, a junction or house number, or by selecting a spe-
cial destination (e.g. motorway junction, train station, etc.).
1 Use the
/ buttons on the rocker switch 7 to select the DEST.
ENTRY menu item.
2 Confirm your selection by pressing the OK button 8.
Destinations
The following destinations are allowed:
• the town centre or centre of a district in cities,
• a road,
• a junction where two or more roads intersect,
• a house or housing block.
NAVIGATION
MERIANscout
DEST. MEMORY
TOURLIST
ROUTE GUIDANCE
DEST. ENTRY
Main navigation menu
To Next Page
Loading...
